必須有軟件為 Mellanox

Mellanox MCX313A-BCBT rev.A4 Network Card Firmware 2.35.5100 ^更新

Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...

20 Dec 15 在司機, 網絡驅動程序

Windows

Mellanox MCX313A-BCBT rev.A5 Network Card Firmware 2.35.5100 ^更新

Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...

20 Dec 15 在司機, 網絡驅動程序

Windows

Mellanox MCX313A-BCBT rev.A6 Network Card Firmware 2.35.5100 ^更新

Changes: - Support multiple RoCE modes (RoCE v1+v2) on the same port: RoCE mode is per connection now. - Added a new QP command “INIT2RTS_QP” to enhance QP connection readiness time. - Disabled FCS checks to support switches that replace FCS...

20 Dec 15 在司機, 網絡驅動程序

Windows

Mellanox MCX313A-BCCT Network Card Firmware 2.35.5100 ^更新

Fixes: - The first Read response was not treated as implicit ACK - Reduced a long 40GbE link up time with Cisco Nexus 3064 and Arista-7050S...

19 Dec 15 在司機, 網絡驅動程序

Windows

Mellanox MCX314A-BCAT rev.A1 Network Card Firmware 2.32.5100

新功能： - 增加支持查詢的pty，PTOS通過註冊PRM ACCESS_REG命令。 - 增加了對中電接入到NVRAM支持。 - 增加了對每個MCG超過22的QP在DMFS支持。 - 增加了對高速率轉向模式（又名簡體指導）支持 - 增加了對通過QUERY_PORT PRM命令讀取當前的硬件模式的支持。 - 在QUERY_DEV_CAP命令新增CSUM模式報告。 - 增加了對UPDATE_QP命令的其他配置選項。 - 增加了128字節的步幅CQ / EQ的支持。 -...

8 May 15 在司機, 網絡驅動程序

Windows